Engineering RFQs answered within 1 business dayrfq@technicalfoamservices.com

Engineering tool

Foam conversion process & cost estimator

Waterjet, CNC routing or a steel-rule die? Enter the part and see the cost per piece, tooling, break-even quantity and expected tolerance for each process.

Units
Material
Part footprint

Enter a length.

Enter a width.

Cut geometry

Intricate = internal cutouts, bolt holes, narrow webs. Stepped = multi-depth pockets.

PSA adhesive backing
Order quantity

Enter a quantity of at least 1.

Tolerance class

Calculating…

How the estimate works

The estimator nests your part on raw sheet with a realistic skeleton-waste factor, prices the foam and adhesive at the sheet-price tier for your quantity, and then prices the cut three ways:

  • Waterjet: $95 CAM and nesting, no tooling, cut time from perimeter and thickness.
  • CNC routing / oscillating knife: $165 CAM, no tooling, plus pocket-clearing time for stepped parts.
  • Steel-rule die: $380–$1,650+ tooling scaled by rule length, $125 press setup, a few cents per hit.

The die-vs-waterjet break-even is where the die's fixed cost is paid back by its lower cost per hit. Material cancels out because both processes cut the same sheet. Every coefficient is listed on the methodology page.

Reading the result

Recommended is the lowest batch total among the processes that can make the part. Stepped pockets always route to CNC; parts over 1" thick skip the die because steel rule dishes the edge.

Warnings flag adhesive pairings that fail in service (200MP acrylic on XLPE, EPDM or silicone), thicknesses beyond what a material is supplied in, and tolerance classes a process cannot hold.

Use Attach to RFQ to send the inputs with your quote request; the link you copy reproduces this exact estimate for a colleague.

Formula and data sources are published on About → Methodology. Estimates are engineering guidance, confirmed at drawing review against the manufacturer TDS.