Engineering RFQs answered within 1 business dayrfq@technicalfoamservices.com

Materials

Technical foam materials directory

Twelve grades cover most OEM foam drawings. Compare them on the numbers that decide the part: compression force, temperature, cell structure and fire rating.

Comparison table

GradeChemistry / cellDensityCFD @ 25%Continuous temp.Fire / complianceRaw sheet $/ft²
PORON® 4701-30Microcellular PU~15 lb/ft³ (240 kg/m³)2–4 psi (14–28 kPa)−51 to +90°CFMVSS 302; UL 94 HBF/HF-1 grades$2.50–$6.00 (1/16"–1/8")
PORON® 4701-40Microcellular PU~15 lb/ft³ (240 kg/m³)4–11 psi (27–76 kPa)−51 to +90°CFMVSS 302; 40V0 UL 94 V-0$2.50–$5.50 (1/16")
PORON® 4701-50Microcellular PU~30 lb/ft³ (480 kg/m³)15–45 psi (103–310 kPa)−51 to +90°CFMVSS 302$3.50–$7.00 (1/16")
BISCO® HT-800Closed-cell silicone~22 lb/ft³ (352 kg/m³)6–14 psi (typ. 9.7)−55 to +200°CUL 94 V-0, HF-1; ASTM E162/E662; FDA 177.2600$4.00–$9.00 (1/16"–1/8")
Plastazote® LD45Closed-cell XLPE (N₂)2.8 lb/ft³ (45 kg/m³)~13.6 psi (94 kPa)−70 to +105°CFR grades: FMVSS 302, FAR 25.853$0.75–$2.50 (1/4"–1/2")
Basotect® G+ / ULOpen-cell melamine0.56 lb/ft³ (9 kg/m³)>1.0 psi (>7 kPa)−200 to +240°CUL 94 V-0, HF-1; FMVSS 302; FAR 25.853 (UL)$1.50–$3.50 (1")
ASTM D1056 2A1 EPDMClosed-cell sponge~7–10 lb/ft³2–5 psi−40 to +105°CWeather / UV / ozone$0.85–$2.20 (1/8"–1/4")
ASTM D1056 2A2 EPDMClosed-cell sponge~8–12 lb/ft³5–9 psi−40 to +105°COutdoor HVAC / enclosure seal$0.95–$2.50 (1/8"–1/4")
ASTM D1056 2A3 EPDMClosed-cell sponge~10–14 lb/ft³9–13 psi−40 to +105°CHigh bolt-load seals$1.10–$2.80 (1/8"–1/4")
ASTM D1056 2C2 neopreneClosed-cell CR blend~10–14 lb/ft³5–9 psi−40 to +93°CMedium oil; UL 94 HF-1 grades$1.20–$3.00 (1/8"–1/4")
ESD conductive XLPE / PUCarbon-loaded PE or PU2.0–4.0 lb/ft³6–14 psi (PE) / 0.5–2 (PU)−40 to +90°CANSI/ESD S20.20, S541$1.80–$4.80 (1/4"–1")
PU ester / ether, 2 lbOpen-cell flexible PU1.8–2.2 lb/ft³0.4–1.2 psi (ILD 25–45)−40 to +95°CMIL-PRF-26514 cushioning$0.40–$1.40 (1/2"–2")
Nominal data sheet values. Raw sheet prices are indicative and exclude converting, adhesive and freight.

How to read the numbers

CFD @ 25% (compression force deflection)

The pressure needed to compress the foam to 75% of its thickness. It sets the closure force a gasket needs and is the basis of the ASTM D1056 grade number. Double the contact area and the force doubles; go from 25% to 50% deflection and the force rises roughly 2.65 times. Size it in the gasket force calculator.

Open-cell vs closed-cell

Closed-cell foams (EPDM and neoprene sponge, XLPE, cellular silicone) do not wick water and seal against immersion. Open-cell foams (melamine, flexible PU) breathe and absorb sound. Microcellular PORON® sits between: very fine cells that seal dust and splash and recover almost completely, but it is not the choice for continuous immersion.

Continuous temperature

The temperature the material tolerates for its service life, not the short excursion limit. PORON® is rated 90°C continuous (121°C intermittent); move to BISCO® silicone for 200°C or melamine for 240°C.

Compression set

The share of deflection the foam does not recover after being held compressed. Low compression set (under 5% for PORON® 4701) keeps a gasket sealing for years; high compression set means it relaxes and leaks.

Material deep-dives

PORON® vs BISCO® HT-800

Urethane vs silicone for EV, electronics and enclosure gaskets.

Read the comparison

Plastazote® & XLPE

Nitrogen-blown cross-linked PE for inserts, packaging and buoyancy.

Read the guide

ASTM D1056 EPDM & neoprene

Type, class and grade decoded, with the CFD grade table.

Read the guide

Basotect® melamine & ESD foams

Acoustic absorbers and electrostatic-safe electronics foams.

Read the guide